Products and Accessories

Use to drift Explorer when boat is anchored or slowly drifting (motor in neutral or off)

• Positions the Explorer to face the direction of the current.
• Clips into either the Explorer or an additional weight.
• Using an additional weight is recommended for optimal performance.

Use to troll Explorer at speeds of up to 8kts or 15km/h

• Ensure use with the long strain relief attached to the Explorer’s rear anchor point.
• The Troll Fin includes an integrated 500g weight and should not be used with additional weights.
• Operates within 1-2 metres of the surface.
• Always deploy and retrieve the Explorer while the boat is in neutral.

Use to attach Explorer to extension poll

• Compatible with any pole featuring a 3/4″ 5 thread fitting (standard painter’s pole).
• Set camera orientation lock is ON (Down), as the Explorer and camera will be positioned upside-down.

Use to attach lure or bait when drifting or trolling

• Available in Small and Large sizes.
• Attach the large clip to the Explorer’s top, middle, and end anchor points.
• Attach the small clip to the Explorer’s top, middle, and front anchor points.
• Allen keys are included for adjustments.
• Increase line grip tension by pushing the slider on the clip backwards.

Use to position Explorer on seafloor bed when boat is anchored

• The Seafloor stand includes a fin that points in the direction of the current.
• Stand legs can be adjusted or folded when not in use by loosening the clamp.
• Spread out the stand legs to enhance stability in stronger currents.
• The direction and angle of the Explorer can be adjusted by loosening the ball mount arm.
• An optional burley bot can be fitted for enhanced functionality.
• Ensure the cable strain relief is attached to the Explorer’s top, middle anchor point during deployment.

Use to suspend Explorer underwater when drifting or anchored

• Inflate the buoy (needle included).
• Attach the buoy at the desired livestream cable length by looping the cord around both the cable and the buoy itself.

Use to fasten livestream cable to boat

• Fasten the bungee cord to a cleat or loop it around a secure rail.
• Weave the livestream cable through the slots in the green attachment to hold the cable at the desired length.

Use with Explorer for underwater livestream

• The built-in transmitter (indicated by the WiFi symbol) can be directed towards the device to enhance the signal.
• To ensure the Reel remains secure, always use the Cable Fastener when the livestream cable and Explorer are set at the desired depth/length.
• The cable length and transmitter can be fixed in position using the reel lock.
• The livestream cable is exceptionally robust, with a break strain of 50 kg.
• Avoid creating kinks in the cable, as this can lead to damage over time.

Use with Explorer for underwater livestream

• For optimal connection, keep the phone and hand reel as close together as possible, ideally no more than 1/2 metre apart.
• To ensure the Hand Reel remains secure, always use the Cable Fastener when the livestream cable and Explorer are deployed to the desired depth/length.
• The livestream cable is very robust, withstanding a break strain of 50 kg.
• Avoid kinks in the cable as they are likely to cause damage over time.

Use to anchor livestream cable to Explorer

• Utilise the short strain relief for the top three anchor points on the Explorer.
• Use the long strain relief for the rear anchor point on the Explorer.
• To secure the strain relief onto the cable, loop it around the stainless steel ring.

Use to securely hold phone

• Attach the phone mount directly on the Seavu Reel or ensure it is within 1/2 meter of the reel for best performance.
• Use of water-resistant devices or devices in water-resistant cases is highly recommended.